With bourbon’s revival and explosion in popularity over the past decade, it has lead many entrepreneurs down the path of opening up their own distilleries. Often times coming from different backgrounds and professions, many have taken the gamble that they have what it takes to strike it rich, or at the very least create a product that they can be proud of. Where many people often think that working in a trendy field such as distilling means it's all fun and games, it can be anything but.

 

Lock 1 Distilling Company based in the small village of Phoenix, New York, is one such company hoping to ride on bourbon’s popularity to help jump start their new distillery. However, co-founder and master distiller Brenden Backus along with his two partners Stephen Dates and Kevin Dates, will be the first to tell you that creating a new distillery from scratch doesn’t come easy or cheap. It takes much more personal sacrifice and elbow grease than many people may realize.

 

 

Lock 1 Distilling Company's co-founder and

master distiller Brenden Backus.

 

Money and time were two factors Backus and his partners constantly found themselves at odds with. If it wasn’t one it was the other, and at many points it was both at the same time.

 

Many craft distilleries state it takes an about a million dollars to get a distillery up and running. Thoroughbred Spirits Consultants, who specialize in helping new, regional and national spirits companies start and build their brands, states it takes anywhere from $3-5 million at a minimum. No matter what size the distillery, both time and money are at a premium and are constantly pulling in opposite directions.

 

“Don’t rush, but rush. Get it in the bottle, but make sure it’s good,” Backus said. “It’s stressful because your [whole focus] is trying to bring a product to market. But the thing we kept a close eye on was don’t rush it. I find too many products from small distilleries that in my opinion were rushed. People didn’t know any better. They didn’t do their research. They made something because now they could make it. That’s what we try not to do here.”

 

It’s easy to have that philosophy, but it’s another thing to follow through with it. Backus stresses when everyone involved has money on the line and is banking on you being able to create a great product, the huge amount of stress involved and the need to get a product to market as fast as possible is a real issue. R&D can take months, and even after a mashbill and distilling process are nailed down it can be months before distilling licenses and label approval are granted and a product can hit store shelves.

 

Backus along with his two partners all grew up in Phoenix, New York, and their families go back generations in the small town. Backus owns Phoenix Welding and Fabricating which employs 20 people. It’s a full time commitment and only gives Backus time on nights and weekends to work on distillery operations. Typically he works two or three nights a week and all day Saturday. Backus has a large family that he also finds time for among his other responsibilities.

 

I have four daughters and a wife. My oldest is 14, and my youngest 22 months old. It’s tough. It’s a sacrifice,” Backus said “Everyone thinks its glorious. ‘Oh you make alcohol. That’s awesome.’ And it is. It’s a great trade and craft. And I love it, but it’s not all smiles and happiness. There’s a lot of stress and self sacrifice.”

 

Even if you’re someone that has time on your side, the monetary side of the startup distillery business can be equally as problematic. Facility and equipment costs can sink anyone’s dreams of opening their own distillery if they aren’t educated on the matter. Backus and his partners knew this going into their venture and devised a unique and crafty plan to tackle it.

 

First, the building that is home to Lock 1 Distilling Company in the heart of Phoenix was owned by Backus’ uncle and partner Kevin’s father. Second, owning their own fabrication company allowed them to build the majority of their own equipment.

 

 

Lock 1 Distilling Company's base of operations was

owned by the family for years before the distillery was created.

 

 

“When you start pricing equipment it will scare you off really quick,” Backus said. “We’ve talked to a lot of people doing this and a lot of people have $800,000 to a million dollars in investments. They build a building, they buy a still, they buy some mash tuns, and fermentors. The money goes quick. I probably visited 12-15 distilleries and that is pretty standard. So we’re probably a quarter of that. Which gives us a huge advantage. And the reason is we built all of our own equipment. The cost savings is huge.”

 

 

 

Owning their own fabricating business allowed Lock 1's

co-owners to build their own distillery equipment, which amounted to a huge cost savings for the company.

 

 

Backus was able to get in at ground level and start producing for a fraction of the cost that other craft distilleries are spending. But people don’t just inherently know how to build distilling equipment, and it wasn’t something Backus’ fabricating company ever tackled before.

 

“At first we made something that didn’t work so great. We learned a lot along the way,” Backus said. “I have a mechanical engineering background, so I have the means to do that type of design. But as most people probably know, sometimes what you put down on paper doesn’t work out exactly as planned. We learned some things from trial and error. It’s fun and frustrating at the same time, but we found what works. We designed our still to do exactly what we want.”

 

It took a year, but with the building and equipment in place, Lock 1 Distilling Company was coming together. With bourbon as their main product goal, they decided to start distilling a vodka as a way to work out any kinks with their equipment and to get a product on store shelves in a more timely manner. The hopeful quick turnaround turned into six months of R&D to develop a vodka up to their personal standards. In the end Backus developed 32 vodkas, and he stressed just because many craft distilleries release vodka first doesn’t necessarily means it’s easy or an automatic slam dunk.

 

“I made some vodka at first that was good vodka, and then finally I made great vodka,” Backus said. “Then when I made great vodka it was like, ‘this is what I want to put in a bottle. This is what I want to sell. This is what I’m going to hang my hat on and sell.’”

 

Before the main phase of development of their vodka, Backus also started the process of federal and state license approval to distill spirits. It begins at the federal level and he joked, “you pull up the application online and it scares you to death.” The question then became should he hire an attorney or fill the application himself? The time and money balancing act once again surfaced, and Backus and his partners decided to do it themselves. Where this saved them money, in the end it cost them more time.

 

“We found running another business limited our time and how much time we had to do this application. So it took us several months to fill out the application, “ Backus said. “We were in the 190 day range for approval. Our federal license was about a year process between us filling it out, learning what we needed to change to put on the application, and actually getting it through the federal application process.”

 

It’s almost been two years since Backus and his partners started their endeavor. The federal application requires applicants to include their equipment serial numbers, so every step in developing a distillery has to be done in sequence. The state license application requires federal approval and also requires proof that your facility is ready to open, your equipment is ready to distill, and insurance is in place. Backus said this can scare people off since it is a major time and financial commitment years in advance of a product hitting the market.

 

In June 2017, Lock 1 Distilling Company’s first product hit the market: RYZE Vodka. It prominently features a phoenix rising from the volcanic ashes on its label. The name and label not only signify where it’s made but also the volcano rock it is filtered through and the rye grain it is made from. Backus waited to design the label until he finalized his vodka mashbill so he could better tie in all of the elements of his product within its label. From there it was another three months before federal label approval was obtained. After that the state had to approve the label. Then more time was needed for the label company to print their labels. As Backus put it, “it’s a waiting game.”

 

 

After months of working with a label designer, maneuvering  the government label approval process, and waiting for labels to be printed, Lock 1's products could finally be packaged and sold.

 

 

For many distilleries federal and state label approval can be a frustrating process and that was no different for Backus.

 

“I know how to make it. I know what I want to make. I’m making it, but I’m waiting for labels to be approved,” Backus said. “I read the beverage alcohol manual that the federal government gives you cover to cover. I thought I knew it all. Now I’m working with a label designer in Las Vegas who I have to convey all of the [rules] too. My first label still took me three tries with the feds.”

 

Once his label was approved and printed and his vodka distilled, bottled and boxed, the question became, “who’s going to buy this stuff and how?”

 

“How do we get it out there? Do we go to distributors. Do we sell [directly] to market? Now you really start to figure out this business,” Backus said. “You now have to deal with inventory management, sales, billing, accounts receivable, [and] accounts billable. So now the business starts to explode now that you can sell your first product.”

 

RYZE Vodka has been on the market for a little over six months and Backus and his partners are happy with its sales. They have since expanded their portfolio with a cinnamon whiskey, gin, and a peppermint whiskey. Bourbon development is under way and is scheduled to begin full production in mid 2018. With Lock 1 Distilling Company’s operation in full swing and money coming in after two long years, the team is energized.

 

 

A few of Lock 1's first products: RYZE Vodka &

Inferno Cinnamon Whiskey.

 

 

The village of Phoenix through a “Restore New York” grant awarded Lock 1 Distilling Company $313,000 for capital improvements to their building. Construction is scheduled for spring 2018. With the other recipient of the grant awarded to a new restaurant in town, within walking distance from Lock 1’s distillery, Phoenix is banking on these two operations to drive interest in their small village.

 

 

ABOVE: The current state of the distillery's tasting room.

BELOW: Plans for the remodeled exterior.

 

 

The last two years has been a lot of hard work for Lock 1 Distilling Company’s team. Besides the financial drain, it has also been a time consuming endeavor that has taken Backus away from his family and evaporated any amount of free time he was hoping to have. If running a distillery isn’t all fun and games, why do people do it? What drives them to take on such responsibilities and hard work?

 

“I saw it as a business that was going to take me to where I wanted to be in life, in retirement, in the future, and growth. And you can create a heritage. You can create a namesake,” Backus said. “I hope this distillery is here years after I’m gone. Someone carries on the name and tradition. Our kids and their kids can run it and make it grow. Plus I’m not getting younger and I don’t want to do construction the rest of my life. The construction business allowed me to have this. So it’s a stepping stone. I couldn’t have done this without that. Hopefully this surpasses that.”

 

This is the first part in an ongoing series that will chronicle Lock 1 Distilling Company’s journey as they grow as a company, develop their first bourbon, and face challenges along the way. Our goal is not to glorify the process but to reveal what it really takes to create a distillery from scratch. Lock 1 has agreed to continually share their story with us, through the good times and potentially bad times, so that spirit lovers will have a better understanding of the trials and tribulations real people go through to follow their dream.

 

Future topics will include: tasting room renovation and grand opening, bourbon mashbill experimentation and development, barrelling, how they price products, distribution, and their bourbon barrel program.

 

Written By Eric

 

Reviewed: 02/2018

 

About the writer

Widget is loading comments...